How to Install a Decorative Metal Gate
- 1). Determine which way you want the decorative metal gate to swing. You should always have the gate opening away from a swimming pool to help prevent accidents.
- 2). Line the hinges up with the rails of adjacent panels for added strength. For instance, the top hinge on the gate post would be even with the top rail of the fence.
- 3). Place the flat side of the top hinge on the post. Secure it with the 2 screws provided. Tighten the screws firmly to avoid the hinge loosening prematurely.
- 4). Secure the bottom hinge on the post, ensuring that the hinges on the post are properly aligned with the hinges on the decorative metal gate.
- 5). Place several blocks along the underside of the gate to support it as you position the gate next to the hinges. You may need an assistant to help hold the gate while you work.
- 6). Secure the gate to the hinges using the screws provided. Ensure that the decorative metal gate opens and closes properly before continuing.
- 7). Determine the height of the gate-latch arm by holding it up at a comfortable level next to the opening side of the gate. Drill a set of pilot holes for the latch arm, then secure it to the gate with the screws provided.
- 8). Position the latch on the gate post so it is aligned with the latch arm. Drill pilot holes for the screws, then insert the screws and tighten them. The latch should now open and close correctly.
